Here we are going to share a process of flashing Samsung Stock Firmware using Odin. Before moving forward make sure you must have an android smartphone, PC, and a USB cable.
Table of Contents
Steps for Flash Samsung Stock Firmware
Step 1: First of all you need to download and install Samsung USB drives on your computer.
Note: If you already installed these drivers skip step 1.
Step 2: Now download Odin, it will be in a ZIP file. Extract it and install it on PC.
Note: If you already installed Odin skip this step.
Step 3: After installation, you need a Samsung Stock Firmware for your phone. Download the exact match file for your mobile model.
Step 4: Turn Off your Samsung mobile phone.
Step 5: Set your device to Download Mode by simultaneously pressing the Power+Home+Volume Down buttons. It will automatically take you to boot mode.
Step 6: When your device is in booted mode, connect your mobile with your Computer.
Step 7: Now launch Odin, it will automatically detect your Samsung device.
Step 8: Click on the BL button, and load the BL file from the downloaded firmware folder.
Step 9: Click on the AP button, and load the AP file from the downloaded firmware folder.
Step 10: Click on the CP button, and load the CP file from the downloaded firmware folder.
Step 11: Click on the CSC button, and load the CSC file from the downloaded firmware folder.
Step 12: Finally all files are loaded in Odin, now click on Start. Once the flashing complete it will show you “PASS”.
Step 13: Disconnect your mobile from the computer and Restart.